PKPEDIA

Tip 1 : Do u know how to use the edit button (abc or pencil button)?
Heres how… in the inbox for example; u wanna delete multiple sms, simply hold the edit button, scroll down, and then, press c to delete the marked sms. The edit button can also b used to copy and past text in sms, simply hold it and scroll across, choose copy. pretty good for placing song names in ngages

Tip 2 : Shit happens, on a smartphone, its inevitable u do something wrong, and tis calls for a format of fone. to format the fone, press *#7370#, then enter the lock code, which is the sec code of the fone. NOTE: batt must b full, else if format is disrupted by low batt, consequences will b disatrous
I heard the code *#7780# works too, pretty much the same i tink.

for 6600 users, to format the fone, theres an alternative way. Press and hold <3>, <*> and Call (Send) buttons, then power on fone, keep holding on the 3 buttons, till u come to a format screen. this method ONLY works on 6600, and need not enter the sec code. BUT sec code would be reset to default 12345.

Tip 3 : TO NGAGE USERS; Did u know u can install .sis files simply using the cable given? Juz plug it in, place the .sis file anywhere on e: (the mmc), not in any folders, root of e:, disconnect, then look for it in manager.

Tip 4: Save on battery and system memory being used by regulary checking the task manager which can be accessed by holding down the menu button!! Tip 5: Type *#06# to display your IMEI serial number, very valuable for the unlocking your phone to other sim cards

Tip 6: Type *#0000# to view which firmware version you are running

Tip 4a: Set the screen saver to a short time out period to prolong battery life.
Tip 4b: Avoid restarting the phone, or repeatedly turning it on and off. This helps increase battery life.

Tip 7: If you would like to avoid being “blue jacked”, keep bluetooth turned off, or set your phone’s visibility to hidden.

Tip 8: Don’t want to carry a watch and a phone? Set the screen saver to show date and time, then you can ditch the watch.

Tip 9: Save memory when installing apps, by installing over bluetooth. This can be done using the nokia phone suite and a bluetooth serial connection. Only works with .SIS files, so java still has to be sent to the phone, but will save space when using .SIS files.

Tip 10: Operator logos
Use a filemanager like FExplorer or SeleQ to add the folders: “c:/system/Apps/phone/oplogo”. Add a .bmp picture to folder “oplogo” and restart your phone! The .bmp picture size needs to be: 97 x 25 pixels

Tip 11: Check if the recepients phone is on
Delivery reports

or

Type *0# your message in the message composer window space then write your message, the recipient will not see the star zero hash bit – just the message When they read it it will relay a message back to your fone showing the time they recieved it. (haven’t yet tried it myself though)

Tip 12: BlueJacking

First up, you need to know what Bluetooth is. There are lots of types of modern devices that incorporate Bluetooth as one of their many features. PDAs, mobile phones and laptops are a few of these modern devices. Bluetooth means that Bluetooth enabled devices can send things like phonebook/address book contacts, pictures & notes to other Bluetooth enabled devices wirelessly over a range of about 10 metres. So, we’ve got past the boring part. Now, using a phone with Bluetooth, you can create a phonebook contact and write a message, eg. ‘Hello, you’ve been bluejacked’, in the ‘Name’ field. Then you can search for other phones with Bluetooth and send that phonebook contact to them. On their phone, a message will popup saying “‘Hello, you’ve been bluejacked’ has just been received by Bluetooth” or something along those lines. For most ‘victims’ they will have no idea as to how the message appeared on their phone.

Tip 13: While you are viewing a picture in your phone’s gallery, press one of these shortcut keys (definitely works on 6600, not sure about other symbians)
1 – turn image anticlockwise
3 – turn image clockwise
* – toggle on/off of full screen
5 – zoom in
0 – zoom out

#15 u can select all files in a folder by selecting THE folder and copy it then paste it somewhere. however u need to make a new directory. fexplorer wun let u copy that folder together. well seleQ can mark files to copy but it really takes time!

#16: A soft and Hard reset
A Soft-reset – the process of resetting all the settings of the phone to the factory default! No applications are deleted! A Hard-reset is like formatting a drive! It does format the memory. Everything that has been installed after the first use of the phone is deleted! It will recover the memory of the phone to the state you purchased it! It is done by inputing the following code: *#7370# NOTE: The battery must be full or the charger has to be connected to the phone so that it does not run out of power and make the phone unusable.

#17: Formats of images

supported ones: JPG UPF GIF87a/89a WBMB MBM TIFF/F PNG EXIF

How to copy & paste text in your Nokia 3650:
Press and hold the pencil key and select your text using the scroll key.
Left function key will change to ‘Copy’. Press it to copy the selected text to clipboard.
You can paste the clipboard contents the same way:
press and hold the pencil key and press ‘Paste’. Or, press pencil key once and select ‘Paste’.

Press and hold the Menu key to open the application switching window, where you can *duh* switch between applications.
If a program hangs and you can’t shut it down, select the application in the
application switching window and press ‘C’ to kill it. It’s also a faster way to exit programs.

Turn on/off the “click” sound made by the camera by selecting the ‘Silent’ profile or by turning warning tones on/off:
Menu > Profiles > “select your activated profile” > Personalise > Warning tones > On/Off.
(This also effects the sound of Java games and apps).

To change background image go to:
Menu > Tools > Settings > Phone > Standby mode > Background image > Yes > “choose an image”.
The best size for background images is 174×132 pixels.

Only got blue, green and purple in your 3650 colour palette?
This free app adds 3 more colours: Palette Extender.

Display an image when someone’s calling:
Menu > Contacts > “select a contact card” > Options > Edit > Options > Add thumbnail > “choose an image”.

Add a personal ringing tone to a contact:
Menu > Contacts > “select a contact card” > Options > Open > Options > Ringing tone > “choose a ringing tone”.

Delete all messages from your Inbox at once:
Menu > Messaging > Inbox > Options > Mark/Unmark > Mark all > Options > Delete.

Send or hide your caller ID: Go to: Menu > Tools > Settings > Call > Send My
Caller ID > ‘Yes’, ‘No’ or ‘Set By Network’ to follow the default settings of your home network.

If you often copy large files to your MultiMedia Card, I recommend a card reader.
E.g. With a card reader it takes only 12 seconds to copy a 10 MB file!

Record the sound of a phone call using the (sound) Recorder.
Menu > Extra’s > Recorder > Options > Record sound clip.
Note: short beeps are audible during call registration.
But there is a 60 second limitation so if you want unlimited sound recording get this app: Extended Recorder.

While writing text, press “#” to switch between upper and lower case and Dictonary on/off (predictive text input).
Press and hold “#” to switch between Alpha mode and Number mode.

Keyboard shortcuts for zooming and rotating images in Images:
1 = zoom in, 0 = zoom out, press and hold to return to the normal view.
2 = rotate anticlockwise, 9 = rotate clockwise, * = full screen.

In standby mode, press and hold the right soft key to activate voice dialling.
To add a voice tag to a phone number, open a contact card and scroll to the phone number and select:
Options > Add voice tag.

You can customize both soft keys located below the screen (in standby mode):
Menu > Tools > Settings > Phone > Standby mode > Left/Right selection key > “select an application”.

In standby mode. press scroll key center (joystick) to go directly to Contacts.

In standby mode, press and hold 0 to launch your wap home page.

In Menu or any subfolder, press numbers 1 – 9 to start the application at that location.
123
456
789

In standby mode,
45# + dials the number on your sim in memory slot 45.
50# + dials slot 50 and so on.

If you have your keylock activated just press the on/off button to turn on your backlight
to look at the time when it’s dark without having to unlock the keypad.

Never, ever, in your whole life, install WildSkinz on your Nokia 3650!!! WildSkinz screws up
the whole 3650 system. It was never intended to work on the 3650, only on the 7650.

Why assigning Video Recorder in the right or left soft key does not work?

(Sound Recorder is launched instead of Video Recorder)
It’s a bug with firmware version 2.50.

How to check your firmware version:

A “Firmware” is the phone’s operating system stored in internal Flash memory of the device (disk Z.
Manufacturers release new firmware versions containing bug fixes, improvements and – sometimes – offering new functions.
Firmware upgrade can only be made in authorized Nokia service centre (point).
To check your current firmware version simply type *#0000# on main Phone screen.

·

How to check your IMEI (International Mobile Equipment Identity)?

Type *#06# on main Phone screen.

Start up in Safe Mode so no ‘auto start’ apps will be running:

To make sure that no memory-resident programs start when you reboot your phone,
hold down the pencil key when you turn on the phone and hold it on untill you have to enter your PIN code.
(When you have trouble booting up the phone with the MMC in it because it got corrupted for some reason, this trick will
almost always let you boot up the phone so you can remove the latest installed app which might have caused the
problem or if your phone is “unrepairable” you can still back up your important data before you do a format.)

Q: How to totally format your Nokia 3650 and remove all installed applications, user files and restore all
settings to default like it’s new out of the box? (OEM apps won’t be deleted like Camera and RealOne Player).

A: First Format your MMC: Menu > Extras > Memory > Options > Format mem. card > Yes.
Note: It is very important to format your MMC before you format your phone!
Then format your phone by typing *#7370# on main Phone screen.
Phone will ask: “Restore all original phone settings? Phone will restart.” Press ‘Yes’ and enter your Lock code (default is 12345).
Tip: Formatting takes several minutes so you’d better connect your Nokia 3650
to a charger to ensure that your battery doesn’t get empty in the middle of formatting.
Note: All your created acces points and mailboxes will be lost so take a note of them. And all application settings will be reset.
E.g. In Camera, image quality is set back to normal and memory in use is set back to phone memory. And also in Messages,
memory in use is set back to phone memory, etc. Also backup your contacts with PC Suite or a program like Contacts Manager.

To reset your wallet, should you forget your code,Type in:
*#7370925538#

this will reset the wallet code, the wallet contents will be deleted.

——————————————————————————————-
How to free more RAM on your phone >>>

>>> Method 1: Flight mode:

Put your phone in “Flight mode” with Psiloc System Tools. Install System Tools, open it and select “Flight mode”. This way you can restart the phone without your SIM card so there will be no running phone tasks in the background. Now you can have up to 3,5 MB of free RAM!

Note: ironically enough, Flight mode doesn’t work when Smart Launcher is installed, at least in my case.
But i’ve also heard several reports of people who have both apps running without any problems.

>>> Method 2: Smart Launcher trick:

Install Smart Launcher and open it. Go to Options, Settings and put Launcher ON.
Now plug in your charger and switch off your phone. Wait untill the battery meter appears and short press the Menu button (don’t hold).
The menu should appear and now you can have 3,5 to 4,5 MB free RAM! (Hold Menu button to check RAM).

The trick is that with the charger plugged in, the phone must get a minimum software support for charging, even when
the phone is switched off. And somehow Smart Launcher has still got it’s shortcut running and that’s the Menu button. So when
you press the Menu button, you go directly to the Menu without any other phone tasks running in the background so
you trick the phone and you have more free RAM!
Note: when you unplug the charger, the phone will switch off.

>>> Method 3: Menu :

This method I found it by myself, it frees a little about 100~200 KB but I guess it’s useful sometime

Close your menu not by selecting the right selection key “exit”, or pressing the menu key another time, they only hide the menu app but do not close it, to close it select the left selection key “option” and scroll down and select “exit”

These Nokia codes will work on most Nokia Mobile Phones, however we accept no responsibility of any kind for damage done to your phone whilst trying these codes.

Code	Description
*3370#	Activate Enhanced Full Rate Codec (EFR) – Your phone uses the best sound quality but talk time is reduced my approx. 5%
#3370#	Deactivate Enhanced Full Rate Codec (EFR)
*4720#	Activate Half Rate Codec – Your phone uses a lower quality sound but you should gain approx 30% more Talk Time.
#4720#	Deactivate Half Rate Codec.
*#0000#	Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type.
*#9999#	Phones software version if *#0000# does not work.
*#06#	For checking the International Mobile Equipment Identity (IMEI Number).
#pw+1234567890+1#	Provider Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols).
#pw+1234567890+2#	Network Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols).
#pw+1234567890+3#	Country Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols).
#pw+1234567890+4#	SIM Card Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols).
*#147#	(vodafone) this lets you know who called you last.
*#1471#	Last call (Only vodofone).
*#21#	Allows you to check the number that “All Calls” are diverted to.
*#2640#	Displays security code in use.
*#30#	Lets you see the private number.
*#43#	Allows you to check the “Call Waiting” status of your phone.
*#61#	Allows you to check the number that “On No Reply” calls are diverted to.
*#62#	Allows you to check the number that “Divert If Unreachable (no service)” calls are diverted to.
*#67#	Allows you to check the number that “On Busy Calls” are diverted to.
*#67705646#	Removes operator logo on 3310 & 3330.
*#73#	Reset phone timers and game scores.
*#746025625#	Displays the SIM Clock status, if your phone supports this power saving feature “SIM Clock Stop Allowed”, it means you will get the best standby time possible.
*#7760#	Manufactures code.
*#7780#	Restore factory settings.
*#8110#	Software version for the nokia 8110.
*#92702689#	Displays – 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again.
*#94870345123456789#	Deactivate the PWM-Mem.
**21*number#	Turn on “All Calls” diverting to the phone number entered.
**61*number#	Turn on “No Reply” diverting to the phone number entered.
**67*number#	Turn on “On Busy” diverting to the phone number entered.
12345	This is the default security code.
press and hold #	Lets you switch between lines.

Hi Dear this is a great help towards GSM trouble shooting you can find
here all types of codes which are kept so much secret by high
officials. Here is a little effort to provide you codes about Nokia,
Motorola, samsung, sony ericson, seimens,LG, panasonic brand phones.

Nokia Codes

To check Phone’s IMEI# *#06#

To check Phone Type and Software Version *#0000# or *#9999# in some models

To Restore Factory Setting *#7780#

To stop Sim Clock( only in DCT3 models) *3370#

To Format User Area (Only In Nokia Symbian phones) *#7370#

To View Phone’s Life Timer *#92702689#

To check weather your SIM Card supports clock stopping
type- *#746025625# (*#SIM0CLOCK#)

Half Rate Mode (HFR):
*4720# to activate HFR. Decreases call quality but increases battery
life by about 30%. #4270# to deactivate HFR.

Default Security Code: 12345

There are 4 different locks on your Nokia phone.

COUNTRY-LOCK
NETWORK-LOCK
PROVIDER-LOCK
SIMCARD-LOCK
The code to read out the sim-lock status of your phone is:

#PW+(MASTERCODE)+(Y)#
# = DOUBLE-CROSS
W = PRESS “*” THREE TIMES
P = PRESS “*” FOUR TIMES
+ = PRESS “*” TWO TIMES
MASTERCODE = 1234567890
Y = NUMBER 1 TO 4
The master code is a secret code. The code has 10 digits, To read out
the sim-lock status you can enter every combination you want!

“Y” Shows the status of the network-lock. Here you can enter a number
from “1″ to “4″. The “4″ is for the sim-card lock.

SIM-LOCK CHECKS

#PW+1234567890+1# = GIVES PROVIDER-LOCK STATUS
#PW+1234567890+2# = GIVES NETWORK-LOCK STATUS
#PW+1234567890+3# = GIVES COUNTRY-LOCK STATUS
#PW+1234567890+4# = GIVES SIM-CARD-LOCK STATUS.

To check Phone’s IMEI# *#06#

To check Phone Type and Software Version *#0000# or *#9999# in some models

To Restore Factory Setting *#7780#

To stop Sim Clock( only in DCT3 models) *3370#

To Format User Area (Only In Nokia Symbian phones) *#7370#

To View Phone’s Life Timer *#92702689#

To check weather your SIM Card supports clock stopping
type- *#746025625# (*#SIM0CLOCK#)

Half Rate Mode (HFR):
*4720# to activate HFR. Decreases call quality but increases battery
life by about 30%. #4270# to deactivate HFR.

Default Security Code: 12345

There are 4 different locks on your Nokia phone.

COUNTRY-LOCK
NETWORK-LOCK
PROVIDER-LOCK
SIMCARD-LOCK
The code to read out the sim-lock status of your phone is:

#PW+(MASTERCODE)+(Y)#
# = DOUBLE-CROSS
W = PRESS “*” THREE TIMES
P = PRESS “*” FOUR TIMES
+ = PRESS “*” TWO TIMES
MASTERCODE = 1234567890
Y = NUMBER 1 TO 4
The master code is a secret code. The code has 10 digits, To read out
the sim-lock status you can enter every combination you want!

“Y” Shows the status of the network-lock. Here you can enter a number
from “1″ to “4″. The “4″ is for the sim-card lock.

SIM-LOCK CHECKS

#PW+1234567890+1# = GIVES PROVIDER-LOCK STATUS
#PW+1234567890+2# = GIVES NETWORK-LOCK STATUS
#PW+1234567890+3# = GIVES COUNTRY-LOCK STATUS
#PW+1234567890+4# = GIVES SIM-CARD-LOCK STATUS.

Samsung codes

You can try these in case you downloaded corrupted or incompatible
Java midlets or other media, which are causing problems with the
phone.

*2767*JAVA# Java Reset and (Deletes all Java Midlets)

*2767*MEDIA# Reset Media (Deletes All Sounds and Pics)

*2767*WAP# Wap Reset

*2767*CUST# Reset Custom EEPR0M

*2767*FULL# Reset Full EEPR0M (Caution)

For example : *2767*JAVA# would be keyed in as *2767*5282#

*2767*JAVA# Java Reset and (Deletes all Java Midlets)

*2767*MEDIA# Reset Media (Deletes All Sounds and Pics)

*2767*WAP# Wap Reset

*2767*CUST# Reset Custom EEPR0M

*2767*FULL# Reset Full EEPR0M (Caution)

For example : *2767*JAVA# would be keyed in as *2767*5282#

Note : Not all codes will work with SGH-C100.

Other Samsung Codes

*#06# IMEI code

*#9998*4357# Help Menu

*#9998*5282# Java menu (GRPS/CSD settings for JAVA server)

*#9999#0# Monitor Mode

*#9999# or *#9998*9999# Software Version

*#8888# or *#9998*8888# Hardware Version

*#9998*746# or *#9998*0746# or *#0746# Sim Infos

*#9998*523# or *#9998*0523# or *#0523# Display Contrast

*#9998*842# or *#9998*0842# or *#0842# Vibration On (until you push OK)

*#9998*289# or *#9998*0289# or *#0289# Buzzer On (until you push OK)

*#9998*288# or *#9998*0288# or *#0288# Battery & Field Infos

*#9998*377# or *#9998*0377# Error log

*#9998*778# or *#9998*0778# or *#0778# Sim Service table

*#9998*782# show date and alarm clock

*#8999*638# show network information

*#9998*5646# change operator logo at startup

*#9998*76# production number

*#9998*968# view melody for alarm

*#9998*585# Non-Volatile Memory (NVM)

*#3243948# Digital Audio Interference Off

*#32436837# Digital Audio Interference On

*#06# IMEI code

*#9998*4357# Help Menu

*#9998*5282# Java menu (GRPS/CSD settings for JAVA server)

*#9999#0# Monitor Mode

*#9999# or *#9998*9999# Software Version

*#8888# or *#9998*8888# Hardware Version

*#9998*746# or *#9998*0746# or *#0746# Sim Infos

*#9998*523# or *#9998*0523# or *#0523# Display Contrast

*#9998*842# or *#9998*0842# or *#0842# Vibration On (until you push OK)

*#9998*289# or *#9998*0289# or *#0289# Buzzer On (until you push OK)

*#9998*288# or *#9998*0288# or *#0288# Battery & Field Infos

*#9998*377# or *#9998*0377# Error log

*#9998*778# or *#9998*0778# or *#0778# Sim Service table

*#9998*782# show date and alarm clock

*#8999*638# show network information

*#9998*5646# change operator logo at startup

*#9998*76# production number

*#9998*968# view melody for alarm

*#9998*585# Non-Volatile Memory (NVM)

*#3243948# Digital Audio Interference Off

*#32436837# Digital Audio Interference On

SAMSUNG T100 SECRET CODES
============================

*#06# -> Show IMEI
*#9999# -> Show Software Version
*#0001# -> Show Serial Parameters

*2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!!!! but
also change IMEI to 447967-89-400044-0, you must use CHGIMEI to
restore it)

*2767*2878# -> Custom EEEPROM Reset
*#8999*228# -> Battery status (capacity, voltage, temperature)
*#8999*246# -> Program status
*#8999*289# -> Change Alarm Buzzer Frequency
*#8999*324# -> Debug screens
*#8999*364# -> Watchdog
*#8999*377# -> EEPROM Error Stack
*#8999*427# -> Trace Watchdog
*#8999*523# -> Change LCD contrast
*#8999*544# -> Jig detect
*#8999*636# -> Memory status
*#8999*746# -> SIM File Size
*#8999*778# -> SIM Service Table
*#8999*785# -> RTK (Run Time Kernel) errors
*#8999*786# -> Run, Last UP, Last DOWN
*#8999*837# -> Software Version
*#8999*842# -> Test Vibrator
*#8999*862# -> Vocoder Reg
*#8999*872# -> Diag
*#8999*947# -> Reset On Fatal Error
*#8999*999# -> Last/Chk
*#8999*9266# -> Yann debug screen (=Debug Screens?)
*#8999*9999# -> Software version

SAMSUNG V200 SECRET CODES

v200 Unlock Code-> *2767*7822573738#

*#9324# Netmon (press the hangup key to exit)
*#9998*JAVA# Edit GPRS/ CSD settings (S100 Only)
*#9998*Help# Help screen/ List of codes
*#9998*LOGO# Change operator Logo
*#9998*RTC# RTC Display
*#9998*Bat# Battery Status
*#9998*Buz# Turns Buzzer ON
*#9998*Vib# Turns Vibrator ON
*#9998*LCD# LCD Contrast
*#9998*9999# Softwre Version
*#9998*8888# Hardware Version
*#9998*377# NVM Error Log (?????)
*#9998*NET# SIM Network ID
*#9998*778# SIM Serv. Table
*#9998*SIM# SIM Info
*#9998*PN# Production No.
*#9998*968# Reminder Tune
*#9998*NVM# Displays Non-Volitile Memory Status
*#9999*C# ???????????????????
*#06# Displays phones I**I No.

***/// ***/// NOTE /// *** RED COLOR , they appear serious !!! Use at
own risk !!!

*#9998*2576# Forces SIM Error
*#9998*DEAD# Forces Phone Crash
*2767*MEDIA# Resets the medis on the phone (deletes all downloaded
pics/tones)
*2767*FULL# Resets the EEPRON *DANGEROUS*
*2767*CUST# Resets the Custom EEPRON
*2767*JAVA# Resets JAV downloads (deletes all downloaded midlits)
*2767*STACKRESET# Resets Stack
*2767*225RESET# ????????????????? * Dangerous *
*2767*WAP# Resets WAP Setting & Deletes Favorites

SAMSUNG A800 SECRET CODES

The universal unlock code is *2767*637# do this with out your sim in

By default, the firmware (software) for x600 only receives java
apps and other applications like stuff by serial port.
but even for it, you have to enable the serial port, which also
causes
the closing of all other ports, even the IrDA too ..

well, guess what, i have very good news for you,
do you know, you can increase the sound level,
the sound level for tones, speaker fone, etc,
can be increase even then if it is at max (level 4)

you still can do it,
just follows the instructions!

**************** HERE WE GO **************

Enter the following code:

*#8999*8378#
(You’ll be shown menu, then …)

then go to:

“H/W test”

then go to:

“Audio Settings”

then go to:

“Melody Gain”

There will you see a number.
there are five (5) Melody Levels” of it.
(and currently, you are at level 1 and after
pressing the “save” button, you will move to
level 2 and so on …………………….)

you have to change the values of all the levels.
and as the resultant, it will give increase the
melody sound!, your tones will more louder,
even more louder then the max. ringing volume.

the level wise numbers are: (as its my setting )

Melody Level 1: 13

Melody Level 2: 17

Melody Level 3: 18

Melody Level 4: 25

Melody Level 5: 31

you even can make your own combinations of level wise
sounding numbers that can change the sound level!.

if your combination cause more louder sound level,
then mine,
then do share it with the group! …
meanwhile, try my figured-out combination!

************ CAUTION ************

if anything goes wrong,
then you can apply the master reset code,
that will NOT delete anything, ANYTHING from your
cell fone, but set each and eveything to its
default/standard setting …
(likes, factory settings )

the master reset code is:

#*7728#

#########################################
I take no responsibility of these codes are working or not,
or its effects on your cell fone
but i have tried these codes on my cell fone.
and i bet, nothing goes wrong,
but even then of my words, be carefull!,
#########################################

The code: *#8999*8378#
as i regarded it a informative code,
will tell you each and everything about your cell fone.
and in the “H/W test”,
there are lot of other Audio settings,
each of them having five (5) levels,
you can change the combination, but before doing anything,
do write the defult number sequence to some place so that
you’ll be then able to invert it again! .. …

#*2558# – Time ON
#*2527# – GPRS Switching Set to class {4/8/9/10}
#*4263# – Handsfree Mode: ACTIVATED
#*53696# – [Java dnload] WAPSAR mode
#*536961# – WAPSAR enable HTTP disable
#*536962# – HTTP enable WAPSAR disable
#*536963# – SERIAL enable Others disable
#*5663351# – [Phone Model] SAMSUNG SGH-X100
#*6420# – Mic off
#*6421# – Mic on
#*7632# – Sleep mode
*#8999*523# – Main LCD Brightness
*#8999*3825523# – (?) External display
*2767*3855# – Full EEPROM reset(Reset all type of locks)also you’ll
lose pictures and java not melody

Remove camera sound:

On main screen type:

*#8999*8378# –> Test mode

H/W test
Audio Settings
Melody Gain

Then replace 6 by 0, it’ll show 12 but it’s OK
Press back until main screen
Then press key volume to minimum and let’s try !!! no more sound
tip by C-Quest

*2767*688# resets the phone

Thats all!!!!!!!!!!!!!!!

Samsung X100 Tricks Tricks

#*0000#
#*0400#
#*1200# – AFC DAC Val
#*1300# – IMEI
#*1400# – IMSI
#*1700# – ( ) Command #*1700 Executed
#*1800# – ( ) Command #*1800 Executed
#*1900# – ( ) Command #*1900 Executed
#*2000# – ( ) Command #*2000 Executed
#*2100# – ( ) Command #*2100 Executed
#*2200# – ( ) Command #*2200 Executed
#*2252# – Current CAL
#*2255# -
#*2256# – Calibr.-Info
#*2282#
#*2285#
#*2286# – Databattery
#*2337# – ( ) Permanent Registration – Not Yet Implemented
#*2355#
#*2400# – ( ) Command #*2400 Executed
#*2474# – For CMD Set – DEBUGBATTERY in cihard.opt
#*2527# – GPRS Switching Set to class {4/8/9/10}
#*2558# – Time ON
#*2562#
#*2565#
#*2677# – AMR State: {None / Full Rate}
#*2679# – Copycat Feature: {ACTIVATED/DEACTIVATED}
#*2787# – CRTP {ON/OFF}
#*2834# – Audio path Mobile Normal
#*2836# – AVDDSS Management: {DEACTIVATED/ACTIVATED}
#*3230# – Trace Enable DCD disable
#*3231# – Trace disable DCD Enable
#*3232# – Current Mode {Trace enabled/DCD enabled}
#*3270# – DCS Support: {DEACTIVATED/ACTIVATED}
#*3282# – Data: {DEACTIVATED/ACTIVATED}
#*3333#
#*3353# – General Defence Code Erased
#*3370#
#*3377#
#*3476# – EGSM: {DEACTIVATED/ACTIVATED}
#*3676# – Flash Volume Formated
#*3683#
#*3737# – Some Codes
#*3777#
#*3779#
#*3825# – ( ) Command #*3825 Executed
#*3837#
#*3849#
#*3851#
#*3876#
#*3877# – Dump of SPY Trace
#*3900#
#*3940# – External looptest 9600 bps not available in SYSOL2
#*3940# – External looptest 115200 bps not available in SYSOL2
#*3941#
#*4200#
#*4263# – Handsfree Mode: ACTIVATED
#*4300#
#*4500#
#*4674# – IMSI| MCC:2 5 0 | MNC 9 2 | 10 11 91 83 50
#*4700# – Half Rate: {ACTIVATED/DEACTIVATED}
#*4760# – GSM: {ACTIVATED/DEACTIVATED}
#*4864#
#*5100#
#*5111# – ( ) Some Codes
#*5132#
#*5133# – ( ) Some Codes
#*5143#
#*5156#
#*5165#
#*5171# – ( ) Some Codes
#*5172# – ( ) Some Codes
#*5173# – ( ) Some Codes
#*5174#
#*5175#
#*5176# – ( ) Some Codes
#*5177#
#*5187# – L1C2G trace: {ACTIVATED/DEACTIVATED}
#*53696# – [Java dnload] WAPSAR mode
#*536961# – WAPSAR enable HTTP disable
#*536962# – HTTP enable WAPSAR disable
#*536963# – SERIAL enable Others disable
#*5376#
#*5400# – ( ) Command #*5400 Executed
#*5500#
#*5600#
#*566335# – [WAP model ID]
#*5663351# – [Phone Model] SAMSUNG SGH-X100
#*5663352# – [Java Model] SEC-SGHS300/1.0
#*5737425# – Java Serial
#*577699# – APN
#*5800# – ( ) Command #*5800 Executed
#*6100# – ( ) Command #*6100 Executed
#*6200#
#*6420# – Mic off
#*6421# – Mic on
#*6422# – Mic dep RXdata
#*6428# – Mic measurement
#*6700#
#*6837# – Official Software Version
#*6900#
#*7200#
#*7222# – Operation Typ: Class C GSM
#*7224# – ERROR
#*7247#
#*7252# – Operation Typ: Class B GPRS
#*7271# – Multi slot: Class 1 GPRS
#*7274# – Multi slot: Class 4 GPRS
#*7276#
#*7284# – Class B
#*7287# – GPRS Attached
#*7288# – GPRS Detached
#*7326# – Accessory: Vibrator
#*7337# – Some kind of Reset Settings
#*7352# – Some Kind of Debug Info
#*7462# – SIM phase
#*7524# – KCGPRS
#*7562# – LOCI GPRS
#*7636#
#*7639#
#*7632# – Sleep mode
#*7633#
#*7638# – RLC always open ended TBF: {ACTIVATED/DEACTIVATED}
#*7646#
#*7665#
#*7666# – SrCell Data
#*7673# – Sleep mode
#*7676# – Command #*7676 Executed
#*7683# – Sleep variable
#*7693# – Sleep deact
#*7728# – RSAV done->reset
#*7763# – SMS bearer CS {ACTIVATED/DEACTIVATED}
#*7825#
#*7828# – Midl Rl51
#*7957# – Command #*7957 Executed
#*7983# – Voltage/Freq {DEACTIVATED/ACTIVATED}
#*7986# – Voltage {DEACTIVATED/ACTIVATED}
#*8462# – Sleep time since SwitchOff
#*8465# – Time in L1
#*8466# – Old Time
#*8645#
#*9278# – Command #*9278 Executed
#*9795# – wtls key: reset
#7263867# – RAM Dump {On/Off}
#7465625*228# – Activa lock deactivated
#7465625*27*
#7465625*2827# – Auto CP lock deactivated
#7465625*28638# – Auto Network lock deactivated
#7465625*28746# – Auto SIM lock deactivated
#7465625*2877# – Auto SP lock deactivated
#7465625*28782# – Auto subset lock deactivated
#7465625*638*
#7465625*746*
#7465625*77*
#7465625*782*
#8999*324#
*#0*
*#0020# –
*#06# – IMEI
*#2255# – Call List
*#4777*8665# – GPRS
*#7465625# – Interrogate ( )
*#8377466# – Software && Hardware Versions
*#8888# – Hardware Version
*#8999*324# – ( ) Some Strange Numbers
*#8999*377# -
*#8999*3825523# – ( )
*#8999*523# – Main LCD Brightness
*#8999*636# – ( ) Another Strange Numbers
*#8999*8376363# – . HW, SW, + Some Code And Data
*#8999*8378# – . , , , HW SW
*#9999# – Software Version

=== : ===

*2767*xx927 – WAP . xx – . , xx=44: *2767*44WAP# xx=31: *2767*31WAP#

*2767*xx667 – MMS.

.

*2767*2877368#
*2767*2878# – EEPROM ( , )
*2767*31667#
*2767*31927#
*2767*33667#
*2767*33927#
*2767*34667#
*2767*34927#
*2767*351667#
*2767*351927#
*2767*3700#
*2767*380667#
*2767*380927#
*2767*3855# – l EEPROM ( SP- !! ) IMEI 447967-89-400044-0, IMEI ( )
*2767*39667#
*2767*39927#
*2767*420667#
*2767*420927#
*2767*43667#
*2767*43927#
*2767*44667#
*2767*44927#
*2767*46667#
*2767*46927#
*2767*49667#
*2767*49927#
*2767*66335#
*2767*688# ( ) [Unlocking Code]
*2767*7100#
*2767*7300#
*2767*73738927# = *2767*RESETWAP#
*2767*7650#
*2767*7667#
*2767*7927#
*2767*8200#
*2767*927#

=== / : ===

*335#
*663867# – mm file dumped
*7465625# -
*7465625*228# – Activa lock personalized
*7465625*27*
*7465625*2827# – Auto CP lock activated
*7465625*28638# – Auto Network lock activated
*7465625*28746# – Auto SIM lock activated
*7465625*2877# – Auto SP lock activated
*7465625*28782# – Auto subset lock activated
*7465625*638*
*7465625*746
*7465625*746*
*7465625*77*
*7465625*782*